Plus v-1100 Benutzerhandbuch
E-22
PC
VIDEO
AUDIO
Cr
Cb
Y
Pr
Pb
Y
COMPONENT
COMPONENT
Connecting Personal Computers and Video Equipment
Connections with Component Signals
When the Video Connectors are Y, Cb, and Cr Connectors
* Make the connection to the projector's VIDEO connector using a component signal cable.
* Switch the input selection of the projector to "YCbCr".
* Switch the input selection of the projector to "YCbCr".
When the Video Connectors are Y, Pb, and Pr Connectors
* Connect a DVI/mini D-sub 15-pin conversion cable to the PC connector of the projector, then make a
further connection using a component cable (which is available as an option).
* Switch the input selection of the projector to "YPbPr".
DVI/mini D-sub 15-pin conversion
cable (Supplied item)
cable (Supplied item)
DVD player, HD video
deck, etc.
deck, etc.
Component cable (Available as an option)
(D-sub 15-pin to RCA
(D-sub 15-pin to RCA
3)
(Order code: 28-690)
Note
YCbCr cannot accept the input of signals other than NTSC 3.58 and PAL.
YCbCr cannot accept the input of signals other than NTSC 3.58 and PAL.
Component cable (Available as an option)
(3.5 mm diameter, 4 Pde, Plug to RCA
(3.5 mm diameter, 4 Pde, Plug to RCA
3)
(Order code: 28-698)
Green
Blue
Blue
Red
Blue
Red
Green