Sony MEX-5DI Betriebsanweisung

Seite von 170
46
01US02CD-U.fm
MEX-5DI
3-242-048-11 (1)
masterpage:Left
Removing the unit
1
Remove the front cover
1
Press the clip inside the front cover 
with the release key (supplied), and 
pry the front cover free.
Note
To protect the surface of the unit, insert thin cloth 
between the release key and the unit when inserting 
the release key.
2
Repeat step 
1
 on the left side.
The front cover is removed.
2
Remove the unit
1
Use the release key to push in the 
clip on the left side of the unit, then 
pull out the left side of the unit until 
the catch clears the mounting.
2
Repeat step 
1
 on the right side.
3
Slide the unit out of the mounting.
Note
Be sure to close the front panel before removing the 
unit. Doing so with the front panel open may cause 
injury to your fingers.
Precautions
• If your car was parked in direct sunlight, allow 
the unit to cool off before operating it.
• Power antennas will extend automatically 
while the unit is operating.
• Do not use the CUSTOM FILE feature while 
driving, or perform any other function which 
could divert your attention from the road.
• Do not drop water or foreign objects on the disc 
tray as a fire or malfunction can occur.
If you have any questions or problems 
concerning your unit that are not covered in this 
manual, please consult your nearest Sony dealer.
Moisture condensation
On a rainy day or in a very damp area, moisture 
condensation may occur inside the lenses and 
display of the unit. Should this occur, the unit 
will not operate properly. In such a case, remove 
the disc and wait for about an hour until the 
moisture has evaporated.
To maintain high sound quality
Be careful not to splash juice or other soft drinks 
onto the unit or discs.
Notes on CD lens
• Do not touch the lens in the disc tray.
• Do not use a commercially available lens 
cleaner.
Notes on LCD display
• Do not push the LCD display strongly. It may 
cause injury or damage the display.
• Bright points of light (red, blue, or green) or 
black dots may appear on the LCD display. 
This is not a malfunction. The LCD is made 
with high-precision technology and more than 
99.99 % of the picture element is intact. 
However, tiny elements of the picture may 
show the above symptoms.
Release key 
(supplied)