Clarion cz101 Betriebsanweisung

English

5. OPERATIONS

Basic Operations

Note:

• Refer to the diagrams in “3. CONTROLS”

when reading this chapter.

CAUTION

When the unit is turned on, starting and
stopping the engine with its volume
raised to the maximum level may harm
your hearings.
Be careful about adjusting the volume.

Power on / off

Notes:

• Start the engine before using this unit.

• Be careful about using this unit for a long

time without running the engine. If you

drain the car’s battery too far, you may not

be able to start the engine and this can

reduce the service life of the battery.

1. Start the engine. The power button / knob

illumination on the unit will light up.

Engine ON
position

2. Press the [SRC /

] button on the front

panel or the remote control to turn on the

power under standby mode. The unit goes

back to the last status after power on.

3. Press and hold the [SRC /

] button on

the front panel or the remote control to

turn off the power.

Mute

Press the [MUTE

] button on the remote

control to mute the volume from the unit.

Note

Doing the operation above again or adjusting

volume will release muting.

Volume adjustment

Turn the [VOLUME

] knob on the front panel

or press the [ ] or [

] button on the

remote control.

The adjustable range of volume is 0 to 40.

CAUTION

While driving, keep the volume level at
which external sounds can be heard.

Playing source selection

Press [SRC /

] button on the front panel

and remote control repeatedly to choose
desired playing source.

Notes:

Playing source selection means selecting

work mode, such as

DISC mode, RADIO

mode and AUX mode.

Display system time

Press the [D

] button on the front panel or

[DISP

] button on the remote control to switch

the display information, system time and
playing source.

RESET

Note:

* When the [RESET

] button is pressed,

frequencies of radio stations, titles, etc.

stored in memory are cleared.

RESET