Samsung av-r700 Betriebsanweisung
Operating VCR (DVD) with
Remote Control
Remote Control
47
•
The remote control may not work on some brands of VCR (DVD)s. Also, some operations may not
be possible depending on your brand of VCR (DVD).
be possible depending on your brand of VCR (DVD).
•
If you do not set the remote control with the code for your brand VCR (DVD), the remote control
work on a Samsung VCR (DVD) by default.
work on a Samsung VCR (DVD) by default.
1
Press MODE button to make VCR indicator
on the remote control flash.
on the remote control flash.
2
Press POWER( ) button to turn on the
VCR (DVD).
VCR (DVD).
3
Point the remote control toward the VCR
(DVD).
(DVD).
4
While holding down POWER( ) button,
enter the code corresponding to your brand
of VCR (DVD).
enter the code corresponding to your brand
of VCR (DVD).
•
If the code matches the VCR (DVD)'s code, the VCR (DVD) will
be turned off.
be turned off.
•
If there is more than one code listed for your VCR (DVD) in the
table, enter one at a time to determine which code works.
table, enter one at a time to determine which code works.
Ex)For a ‘Samsung’ VCR (DVD)
While holding down POWER( ) button, use the Numeric
button to enter 00, 32~45, 87, and 88.
button to enter 00, 32~45, 87, and 88.
•
If you operate DVD, press Device Select button to make DVD
indicator on the remote control flash.
indicator on the remote control flash.
•
You can use VCR (DVD) POWER, VOLUNE, PLAY, PAUSE,
STOP, SKIP and Numeric button (0~9).
STOP, SKIP and Numeric button (0~9).
5
If VCR (DVD) is turned on or off when you press
the power button of the remote controller, the
setting is completed.
the power button of the remote controller, the
setting is completed.
AS700GB 11/24/04 10:54 AM Page 47