Samsung HT-D550 Benutzerhandbuch

English

Setup

NOTE

ASC setup can be made when there is no disc

in the product.
You cannot adjust the volume during the ASC

setup.
If the auto sound microphone is disconnected

during the ASC setup, the setup will be

canceled.
When ASC function is activated, the DSP/EQ,

Dolby Pro Logic ll and P. BASS sound effects

will not work.
If the product is connected to external devices

or other components (such as an iPod, AUX,

D.IN), the ASC Setup may not work exactly.
Place the microphone on the main listening

position.
Nothing should get in the way between

speakers and microphone.
Note that the test tone of the speaker may be

loud when conducting the test.
Do not place the microphone behind the

furniture or too close to the wall. Otherwise,

it can produce an incorrect test result.

Auto Sound Calibration

You will hear either the ASC mode or the User

Speaker Settings.

On :

You will hear sound in the Auto Sound

Calibration(ASC) mode.

Off :

You will hear sound in the Speaker Setting

value you set.

Settings

Move

Select Return

Change

Select Return

Auto Sound Calibration : On

▶

Auto Sound Calibration Setting

Auto Sound Calibration

✎

Auto Sound Calibration Setting

Plug the ASC microphone into the ASC input

jack.
Place the ASC microphone at the listening

position.

Auto Sound Calibration will be automatically set

up in the following sequence:

Front Left ; Center ; Front Right ; Surround

Right ; Surround Left ; Subwoofer
Press the RETURN button to cancel the Auto

Sound Calibration Setting.
When the message "REMOVE MIC" appears on

the display, unplug the ASC microphone.

NOTE

Setting the Auto Sound Calibration function

takes about 3 minutes.

DRC (Dynamic Range Compression)

This feature balances the range between the loudest

and quietest sounds. You can use this function to

enjoy Dolby Digital sound when watching movies at

low volume at night.

You can select either Full, 6/8, 4/8, 2/8, off.

AUDIO SYNC

Video and audio sync may not match with digital TV.

If this occurs, adjust the audio delay time to

match the video

You can set the audio delay time between 0 mSec

and 300 mSec. Set it to the optimal status.

✎