Samsung ht-c6600 Benutzerhandbuch

English

02

Connections

HDMI IN : Connecting to an External Component with an HDMI Cable

Connect an HDMI cable (not supplied) from the HDMI IN jack on the back of the product to the HDMI OUT jack 
on your digital device.

Press the FUNCTION button to select HDMI. IN1 or HDMI. IN2 input.
The mode switches as follows : BD/DVD  D. IN  AUX  HDMI. IN1  HDMI. IN2  FM

HDMI Auto Detection Function

If you have connected your home theater by HDMI cable, the home theater's video output 
automatically switches to the HDMI mode when you turn it on. For available HDMI video resolutions, 
see page 34.

This function is not available if the HDMI cable does not support CEC.

HDMI connection description

- HDMI outputs only a pure digital signal to the TV.

-  If your TV does not support HDCP, random noise appears on the screen.

What is the HDCP?

HDCP (High-band width Digital Content Protection) is a system for preventing BD/DVD content outputted via 
HDMI from being copied. It provides a secure digital link between a video source (PC, DVD. etc) and a display 
device (TV, projector. etc). Content is encrypted at the source device to prevent unauthorized copies from being 
made.

CAUTION

The Anynet+ function is supported only when an HDMI Cable is connected to the HDMI OUT of the 
product.

•
•

•



Connect the FM antenna supplied to the FM 
75Ω COAXIAL jack.

Slowly move the antenna wire around until you 
fi nd a location where reception is good, then 
fasten it to a wall or other rigid surface.

NOTE

This product does not receive AM broadcasts.

✎



FM Antenna (supplied)

HT-C6600_XAA_0504.indd   25

HT-C6600_XAA_0504.indd   25

2010-05-04     2:14:50

2010-05-04     2:14:50