Samsung 173P Betriebsanweisung
Undo - Restores the monitor value for the active control pane to its previous setting. If no change
was made to the current control pane, undo will have no affect.
Reset - Restores the monitor value for the active control pane to its factory setting.
Slider - Increases or decreases the monitor value for the current control pane.
Previous - Returns to the previous control pane in the tuning sequence. All changes to the current
pane are applied.
Next- Forwards to the next control pane in the tuning sequence. All changes to the current pane are
applied.
Cancel - Cancels the Wizard mode. All changes to the current session are not applied.
Pattern - Dimmed in Wizard mode. All patterns are automatically loaded and the Magic Tune
Control Panel is position in the bottom center of the screen.
Wizard Mode Adjustment Sequence
Resolution- Lists all supported resolutions of the display. Select the Preferred button to set the
display to the manufacturer's recommended settings. Selecting any resolution over than Preferred
will reduce the clarity of the display.
Image Setup - Loads the Clock and Phase instruction pane, pattern, and slider controls. Select the
AUTO button, then use the Clock and Phase slider to completely eliminate residual noise.
Brightness - Loads the Brightness instruction pane, pattern, and slider control. Use the slider to
tune the brightness in the darker image area.
Contrast - Loads the Contrast instruction pane, pattern, and slider control. Use the slider to tune
the contrast.
Position - Loads the Position instruction pane, pattern and control buttons. Use the control buttons
to position the grid so that all edges are visible.
White Point - Lists the supported white point presets, pattern, and slider control. Select the Normal
button to set the display to the manufacturer's recommended white point or use the slider to fine
tune the white point. Note: Some displays do not allow for gradual white point adjustment.
Color Calibration - Goes through a 3-step process for color calibration. Once complete, Magic
Tune will ask if you wish to save the current settings. NOTE: OSD mode Options>Preferences
allows for a 6-step process for better color reproduction.
was made to the current control pane, undo will have no affect.
Reset - Restores the monitor value for the active control pane to its factory setting.
Slider - Increases or decreases the monitor value for the current control pane.
Previous - Returns to the previous control pane in the tuning sequence. All changes to the current
pane are applied.
Next- Forwards to the next control pane in the tuning sequence. All changes to the current pane are
applied.
Cancel - Cancels the Wizard mode. All changes to the current session are not applied.
Pattern - Dimmed in Wizard mode. All patterns are automatically loaded and the Magic Tune
Control Panel is position in the bottom center of the screen.
Wizard Mode Adjustment Sequence
Resolution- Lists all supported resolutions of the display. Select the Preferred button to set the
display to the manufacturer's recommended settings. Selecting any resolution over than Preferred
will reduce the clarity of the display.
Image Setup - Loads the Clock and Phase instruction pane, pattern, and slider controls. Select the
AUTO button, then use the Clock and Phase slider to completely eliminate residual noise.
Brightness - Loads the Brightness instruction pane, pattern, and slider control. Use the slider to
tune the brightness in the darker image area.
Contrast - Loads the Contrast instruction pane, pattern, and slider control. Use the slider to tune
the contrast.
Position - Loads the Position instruction pane, pattern and control buttons. Use the control buttons
to position the grid so that all edges are visible.
White Point - Lists the supported white point presets, pattern, and slider control. Select the Normal
button to set the display to the manufacturer's recommended white point or use the slider to fine
tune the white point. Note: Some displays do not allow for gradual white point adjustment.
Color Calibration - Goes through a 3-step process for color calibration. Once complete, Magic
Tune will ask if you wish to save the current settings. NOTE: OSD mode Options>Preferences
allows for a 6-step process for better color reproduction.
2. OSD Mode