Epson C88 Kurzverweiskarte
Removing and Installing Ink Cartridges
25
Removing and Installing Ink Cartridges
Be sure you have a new ink cartridge before you begin. Once you start replacing a
cartridge, you must complete all the steps in one session.
cartridge, you must complete all the steps in one session.
Caution:
Leave all ink cartridges installed until you have obtained a replacement, or the ink
remaining in the print head nozzles may dry out.
Leave all ink cartridges installed until you have obtained a replacement, or the ink
remaining in the print head nozzles may dry out.
1. Make sure the printer is turned on (the green
power light should be on,
but not flashing).
2. Open the printer cover.
3. Press and release the ink button.
The ink cartridge holder moves to the left, and the cartridge that needs to be
replaced stops under the ink replacement mark. The
replaced stops under the ink replacement mark. The
power light flashes.
Caution:
To avoid damaging the printer, never move the print head by hand.
To avoid damaging the printer, never move the print head by hand.
Note:
Don’t hold down the
Don’t hold down the
ink button for more than 3 seconds, or the printer will start
to clean the print head.
If no cartridge needs to be replaced, the holder moves to the ink cartridge
replacement position, shown on the next page. Go to step 5.
replacement position, shown on the next page. Go to step 5.