Epson C88 Produktdatenblatt

Seite von 10
Epson Stylus C88
10
 -
 Epson Stylus C88
6/05
Cleaning the Printer
To keep your printer working at its best, you should clean it 
several times a year. 
1. Turn off the printer, unplug the power cord, and 
disconnect the cable.
2. Remove all the paper, then use a soft brush to clean the 
sheet feeder.
3. If the outer case or inside of the sheet feeder is dirty, clean it 
with a soft cloth dampened with mild detergent. Keep the 
printer cover closed to prevent water from getting inside.
4. If ink accidentally gets inside the printer, wipe off the rollers 
shown below with a damp cloth.
Warning: Don’t touch the gears or any other parts inside the printer.
Caution: Never use a hard or abrasive brush, or benzine, alcohol, or 
paint thinner for cleaning; they can damage the printer components 
and case. Don’t get water on the printer components and don’t spray 
lubricants or oils inside the printer. 
Transporting the Printer
If you need to transport your printer some distance, carefully 
prepare and repack it as described below. Use the original box 
and packing materials, or a similar box that holds the printer 
securely.
Caution: When storing or transporting the printer, do not tilt it, stand 
it vertically, or turn it upside down. Otherwise, ink may leak from the 
cartridges. Be sure to leave the ink cartridges installed. Removing the 
cartridges can dehydrate the print head and may prevent the printer 
from printing.
1. Plug in the printer and turn it on. Wait until the print head 
returns to the home position, then close the printer cover.
2. Turn off the printer, then unplug its power cord and 
disconnect it from the printer.
3. Disconnect the interface cable.
4. Remove all paper from the sheet feeder and remove the 
paper support.
5. Secure the ink cartridge holder with tape, as shown below, 
then close the printer cover and output tray.
6. Attach the protective materials to both sides of the printer.
7. Repack the printer, paper support, and power cord in the 
original box.
Note: Keep the printer level during transport and be sure to remove 
the protective materials and tape before using the printer again.
Related Documentation
CPD-19910
Epson Stylus C88 Start Here
CPD-19911
Epson Stylus C88 Quick Guide
CPD-19909
Epson Stylus C88 CD-ROM with User’s Guide
Clean 
here