Epson cx9475 Benutzerhandbuch

Solving Problems

Check the solutions below if you’re having trouble installing your all-in-one.

■

Make sure that the print server is turned on and connected correctly.

■

Make sure the antenna is connected to the print server and that it is upright.

■

Make sure that your computer and print server are connected to the wireless 
access point. If the print server finds another access point with the same SSID 
as your access point, you should personalize your SSID to avoid potential 
conflicts.

■

Make sure that the print server is connected to your network with the 
included Ethernet cable during the installation.

■

If you have a software firewall installed on the computer you want to print 
from, you need to grant full network access to the Edimax software. If 
necessary, open TCP port 14135 and UDP ports 69, 13364, 13621, 13878, 
and 14135 in your firewall software. See your firewall documentation for 
details.

■

Make sure your access point is set to broadcast its SSID. If it is hidden, you 
will not be able to select it when installing the print server.

■

Make sure the antenna is connected to the print server and that it is oriented 
correctly.

■

Make sure that the print server is within range of the wireless access point.

■

Make sure that your computer and print server are connected to the same 
wireless access point. If the print server finds another access point with the 
same SSID as your access point, you should personalize your SSID to avoid 
potential conflicts.

■

Make sure that your wireless access point is set to use one of the print server’s 
supported security settings: None, WEP 64, WEP 128, or WPA-PSK.

■

If your wireless access point has security enabled, make sure that you entered 
the correct security key or passphrase.