Epson 800N Installationsanleitung

6. Type a name for the port in the 

Name

 box. Make sure the 

name is not the same as an existing port, such as LPT1.

7. Select the target node address from the 

Card Address

 list. 

Make sure this address matches the one listed under Node 
Number on the status sheet.

8. Click the 

Timers

 button and select the 

Job Based 

option. 

Then click 

Close

.

9. Click 

Next

, then follow the instructions on the screen for 

printer driver installation.

After you have installed the DLC protocol, follow these steps to 
configure the card and your printer for Windows NT 3.5x:

1. Double-click 

Print Manager

 in the Main group.

2. Choose 

Create Printer

 from the Printer menu. The Create 

Printer dialog box appears.

3. Type a name for the printer. Then select the printer driver 

from the Driver menu. Select 

Other

 from the Print To 

menu. The Print Destinations dialog box appears.

4. Choose 

Hewlett Packard Network Port

 from the 

Available Print Destinations list. 

5. Type a name for the port in the Name box. Make sure the 

name is not the same as an existing port, such as LPT1.

6. Select 

LAN Hardware Address (Node Address) 

from 

the Card Address list. This address matches the one listed 
under Node Number on the status sheet.

7. Click the 

Timer

 button and select the 

Job Oriented

 

option. Then click 

OK.

 Click 

OK

 again to exit the dialog 

box.

Note:
If you want to share the 
new printer, click Share 
the Printer on the 
Network. The share 
name defaults to the 
printer name; you can 
change it if necessary. 
For more information 
about sharing, see your 
Windows NT 
documentation.

QuikSet2.fm  Page 21  Wednesday, October 15, 1997  3:49 PM