Epson 800N Installationsanleitung
2
Setup Guide
◗
EPSON Type B Ethernet Interface Card
Supplement
Contains instructions for configuring and using the
Ethernet card with a Macintosh network, initializing the
card, using the card with NetWare on a WAN, and using
TCP/IP with Windows 95.
Ethernet card with a Macintosh network, initializing the
card, using the card with NetWare on a WAN, and using
TCP/IP with Windows 95.
◗
EPSON Status Monitor 2 for Windows
Allows you to monitor your printer over the network and
configures Windows 95 peer-to-peer printing
environments (2 diskettes).
configures Windows 95 peer-to-peer printing
environments (2 diskettes).
◗
EPSON Status Monitor 2
User’s Guide
Provides instructions for installing and using the utility in a
TCP/IP or NetWare environment.
TCP/IP or NetWare environment.
Setting Up Your Printer
First you must unpack your printer and get it ready for
operation. Then you need to install your ink cartridges and load
some paper before you can test the printer.
operation. Then you need to install your ink cartridges and load
some paper before you can test the printer.
Getting the Printer Ready
Follow these steps:
1. Remove any packing material from the printer, as described
on the Notice Sheet in the box. Save all the packaging so
you can use it if you need to transport the printer later.
you can use it if you need to transport the printer later.
QuikSet2.fm Page 2 Wednesday, October 15, 1997 3:49 PM