Lexmark 3100 mfp Installationsanweisungen

Place the drawer on top of the previously installed drawer or 
caster base.

Insert two short stabilizer screws (2) into the pockets of the 
250-sheet drawer.

The screws go through the drawer and into the top of the 
screws of the previously installed drawer or into the caster 
frame assembly.

Tighten the screws securely.

Remove the duplex unit from the carton.

Remove all packing material and tape.

If you are using a table or printer stand, then place the duplex 
unit in that location and go to “Positioning the printer” on 
page 12, otherwise continue to step 4.

Use a flat tip screwdriver to remove the rubber feet from the 
bottom of the duplex unit.