Lexmark 3100 mfp Installationsanweisungen
38
Set up network scanning
Performing Scan
to E-mail General
Setup
to E-mail General
Setup
Specify SMTP gateway and other E-mail settings
1
Type the IP address of the MFP in the URL field of your
browser, and then press Enter.
browser, and then press Enter.
2
Click Configuration.
3
Under the MFP heading, click Scan to E-mail General Setup.
Note:
You may want to use
the network administrator’s
address as the default
address. When an e-mail
cannot be sent, notification
is returned to this address.
address as the default
address. When an e-mail
cannot be sent, notification
is returned to this address.
4
Specify the SMTP gateway of your network or internet service
provider, plus your e-mail address for the reply line of the
message.
provider, plus your e-mail address for the reply line of the
message.
5
Enter a subject (descriptive name) and a generic message
suitable for use on all Scan to e-mail jobs.
suitable for use on all Scan to e-mail jobs.
This information appears on all e-mail scanned to permanent
e-mail destinations.
e-mail destinations.
6
To store scanned documents on a Web site and send only a
Web link in the e-mail, complete the Web Link section.
Web link in the e-mail, complete the Web Link section.
7
After entering your choices, click Submit.
Creating
permanent e-mail
destinations
permanent e-mail
destinations
Create a separate recipient entry for each destination and give them
unique names easily identified in the destinations list.
unique names easily identified in the destinations list.
1
Type the IP address of the MFP in the URL field of your
browser, and then press Enter.
browser, and then press Enter.
2
Click Configuration.
3
Under the MFP heading, click Manage Destinations.
Note:
Before you create a
destination, check the list at
the bottom of the Web page.
Make sure your recipient is
not already listed.
the bottom of the Web page.
Make sure your recipient is
not already listed.
4
Click E-mail Destinations Setup.
5
Enter a unique name for the destination.
6
Enter the destination e-mail address.
7
Specify to send the scanned document either as an
Attachment or as a Web Link.
Attachment or as a Web Link.
8
Select scan type and resolution.