Lexmark 3100 mfp Installationsanweisungen
4
Assemble paper handling options
Step 2: Assemble paper
handling options
CAUTION:
If you are using
a 2000-sheet drawer, a
duplex unit with one or more
input drawers, or more than
one 500-sheet drawer, you
must use either a printer
stand or a caster base.
duplex unit with one or more
input drawers, or more than
one 500-sheet drawer, you
must use either a printer
stand or a caster base.
If you purchased a printer stand, follow the assembly instructions
provided with the stand, and then return to Step 2: “Assemble paper
handling options” in this book.
provided with the stand, and then return to Step 2: “Assemble paper
handling options” in this book.
The caster base is used when placing your MFP on the floor. It
provides mobility and a stable platform for your MFP. There are
different assembly instructions for use with a 2000-sheet drawer, 500-
sheet drawer, or a 250-sheet drawer.
provides mobility and a stable platform for your MFP. There are
different assembly instructions for use with a 2000-sheet drawer, 500-
sheet drawer, or a 250-sheet drawer.
Preparing the
caster base
caster base
1
Remove all items from the caster base carton.
2
Remove and group the machine screws, washers, stabilizer
screws, and posts from the hardware bag.
screws, and posts from the hardware bag.
CAUTION:
The correct
stabilizer screws must be
installed in each optional
drawer and the duplex unit
to secure the printer and
options together.
installed in each optional
drawer and the duplex unit
to secure the printer and
options together.
3
Determine which screws you need for your configuration and
place the other screws into the bag.
place the other screws into the bag.
•
The six long screws (1) are used with three 500-sheet
drawers. (two with each 500-sheet drawer)
drawers. (two with each 500-sheet drawer)
•
The six short screws (2) are used with the 2000-sheet
drawer or the 250-sheet drawers.
drawer or the 250-sheet drawers.
•
The two long posts (3) are used with the duplex unit.
•
The two short posts (4) are used when a duplex unit is not
available.
available.
•
The two long machine screws (5) are used with the 2000-
sheet drawer.
sheet drawer.
•
The two short machine screws (6) are not used with this
scanner.
scanner.
Depending on your configuration, some of the stabilizer screws
and posts will not be used.
and posts will not be used.
4
If you have a 2000-sheet drawer, place a lock washer and flat
washer on each of the two long machine screws (5).
washer on each of the two long machine screws (5).