KYOCERA neo Betriebsanweisung
User Guide
9
1
Get Started
Phone Battery
Install the Battery
To install the battery:
1.
Hold the phone face down.
2.
Find notch directly
above the back cover. It
is square. Use the notch
to slide the cover down.
Lift the cover from the
bottom to remove.
above the back cover. It
is square. Use the notch
to slide the cover down.
Lift the cover from the
bottom to remove.
3.
Place the battery in the
battery casing with the
metal contacts facing
toward the bottom of
the phone. The metal
contacts of the battery
must make contact with
the metal contacts of the
battery casing.
battery casing with the
metal contacts facing
toward the bottom of
the phone. The metal
contacts of the battery
must make contact with
the metal contacts of the
battery casing.
4.
Replace the battery door
by sliding the notches
into the openings on
each side of the battery casing.
by sliding the notches
into the openings on
each side of the battery casing.
5.
Snap the cover into place.
Charge the Battery
You must have at least a partial charge in the
battery to make or receive calls.
battery to make or receive calls.
To charge the battery:
1.
Connect the AC adapter
to the microUSB jack on
the side of the phone.
to the microUSB jack on
the side of the phone.
2.
Plug the adapter into a
wall outlet.
wall outlet.
The battery icon in the
upper-right corner of the screen tells you
whether the phone is:
upper-right corner of the screen tells you
whether the phone is:
–
Charging (the icon is animated)
–
Partially charged
–
Fully charged
You can safely recharge the battery at any time,
even if it has a partial charge.
even if it has a partial charge.
Warning: The battery will not charge if you use
the phone while it is connected to an AC adapter.
the phone while it is connected to an AC adapter.
Note: Before removing the battery, make sure the
phone is powered off.
phone is powered off.