Manualsbrain.com
  1. Handbücher
  2. Marken
  3. LG
  4. 47LW5700
  5. Benutzerhandbuch

LG 47LW5700 Benutzerhandbuch

Download
Seite von 171
12. OSD Select (Command: k l)
To select OSD (On Screen Display) on/off.
Transmission [k][l][ ][Set ID][ ][Data][Cr]
Data 00: OSD off  
Data 01: OSD on
Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x]
13. Remote Control Lock Mode (Command: k m)
To  lock  the  remote  control  and  the  front  panel 
controls on the set.
Transmission [k][m][ ][Set ID][ ][Data][Cr]
Data 00: Lock off 
Data 01: Lock on
Acknowledgement [m][ ][Set ID][ ][OK/NG][Data][x]
If you’re not using the remote control and front panel
controls on the Monitor set, use this mode. When 
main power is on/off, remote control lock is released.
If Key Lock is on in the standby mode, TV will not 
turn on by POWER button of remote control and on 
the TV.
14. Treble (Command: k r)
To adjust treble.
You can also adjust treble in the AUDIO menu.
Transmission [k][r][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal 
code)
*Refer to “Real data mapping”.
Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x]
15. Bass (Command: k s)
To adjust bass.
You can also adjust bass in the AUDIO menu.
Transmission [k][s][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal 
code)
*Refer to “Real data mapping”.
Acknowledgement [s][ ][Set ID][ ][OK/NG][Data][x]
16. Balance (Command: k t)
To adjust balance.
You can also adjust balance in the AUDIO menu.
Transmission [k][t][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal 
code)
*Refer to “Real data mapping”.
Acknowledgement [t][ ][Set ID][ ][OK/NG][Data][x]
17. 3D (Command: x t) (For 3D TV)
 To change 3D mode for TV.
Transmission [x][t][ ][Set ID][ ][Data01]
[ ][Data02][ ][Data03][ ][Data04][Cr]
Data1
        00: 3D On   
01: 3D Off
        02: 3D 
➙ 2D 
03: 2D 
➙ 3D
Data2
        00: Top and Bottom  01: Side by Side
        02: Check Board 
03: Frame Sequential
Data3
        00: Right to Left 
01: Left to Right
Data4
        3D Depth: Min : 00 ~ Max : 14 
        (*transmit by Hexadecimal code) 
* If data1 is 00(3D On), data4 has no meaning.
* If data1 is 01(3D off) or 02(3D to 2D), data2, data3 
and data4 have no meaning.
* If data1 is 03(2D to 3D), data2 and data3 have no 
meaning.
Data 1
Data 2
Data 3
Data 4
00
o
o
x
01
x
x
x
02
x
x
x
03
x
x
o
x : Don’t care
Acknowledgement [t][ ][OK][Data01][Data02]
[Data03][Data04][x][t][ ][NG][Data01][x]
18. Color Temperature (Command: x u)
To adjust color temperature.
You  can  also  adjust  color  temperature  in  the 
PICTURE menu.
Transmission [x][u][ ][Set ID][ ][Data][Cr]
Data Min: 00 ~ Max: 64 (*transmit by Hexadecimal 
code)
*Refer to “Real data mapping”. 
Acknowledgement [u][ ][Set ID][ ][OK/NG][Data][x]
 
19. Extended 3D (Command: x v) (For 3D TV)
To change 3D option for TV.
Transmission [x][v][ ][Set ID][ ][Data01][ ][Data02][Cr]
Data1: 3D option
        00: 3D Picture Correction
        01: 3D Depth (2D to 3D Only)
        02: 3D Viewpoint
        03: 3D Picture Size
        04: 3D Picture Balance
        05: 3D Optimization
Data2: It has own range for each 3D option 
determined by Data1.
1) When Data1 is 00
        00: Right to Left        01: Left to Right
2) When Data1 is 01
Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code)
3) When Data1 is 02
 Data Min: 00 ~ Max: 14 (*transmit by Hexadecimal code)
4) When Data1 is 03
        00: Just Scan 
01: 16:9
5) When Data1 is 04
       00: Off       
01: On
6) When Data1 is 05
Data Min: 00 ~ Max: 02 (*transmit by Hexadecimal code)
Acknowledgement [v][ ][OK][Data1][Data2][x]
[v][ ][NG][Data1][x]
*  Use the feature depending on your model.
136
ENG
ENGLISH
EXTERNAL CONTROL DEVICE SETUP