LG 47LW5700 Benutzeranleitung

 

y

There may be interference relating to 
resolution, vertical pattern, contrast or 
brightness in PC mode. Change the PC 
mode to another resolution or change the 
refresh rate to another rate or adjust the 
brightness and contrast on the menu until the 
picture is clear. If the refresh rate of the PC 
graphic card can not be changed, change the 
PC graphic card or consult the manufacturer 
of the PC graphic card.

 

y

The synchronization input waveform for 
Horizontal and Vertical frequencies are 
separate.

 

y

We recommend using 1920x1080, 60 Hz for 
the PC mode, this should provide the best 
picture quality.

 

y

Connect the signal cable from the monitor 
output port of the PC to the RGB (PC) port 
of the TV or the signal cable from the HDMI 
output port of the PC to the HDMI IN (or 
HDMI/DVI IN) port on the TV.

 

y

Connect the audio cable from the PC to the 
Audio input on the TV. (Audio cables are not 
included with the TV).

 

y

If using a sound card, adjust PC sound as 
required.

 

y

If the graphic card on the PC does not output 
analogue and digital RGB simultaneously, 
connect only one of either RGB or HDMI IN 
(or HDMI/DVI IN) to display the PC output on 
the TV.

 

y

DOS mode may not work depending on the 
video card if you use an HDMI to DVI cable.

 

y

If you use too long an RGB-PC cable, there 
may be interference on the screen. We 
recommend using under 5m of cable. This 
provides the best picture quality.