LG 47LW5700 Benutzeranleitung

The Magic Motion Remote Control operates by 
pairing with your TV.
Register the Magic Motion Remote Control to use.

To register the remote control, press the 

OK button 

on the remote control while aiming it at your TV.

Reset the remote control by pressing and holding 
both the 

OK and MUTE buttons for 5 seconds. 

(Once the reset is complete, the light on the 
Pointer blinks.) Then repeat the above procedure 
to register the remote control.

1

  Press 

OK button if there is no pointer on your 

TV screen. The pointer will then appear on the 
screen.
If the pointer has not been used for a certain 

period of time, it will disappear.

2

  You can move the pointer by aiming the Pointer 

Receiver of the remote control at your TV then 
move it left, right, up or down.
If the pointer does not work properly after click-
ing the 

OK button, leave the remote control for 

10 seconds then use it again.

(Only 32/37/42/47/55LV37**, 

32/37/42/47/55LV55**, 32/42/47/55LW57**, 

42/47/55/65LW65**)    

Image shown may differ from your TV.

3 

Attach the RF Dongle to the velcro as shown 

below and then turn on the TV.

* If the RF dongle for the wireless media box is attached, 

attach the RF dongle for the Magic Motion remote 

control on the upper right of the back of the TV.

* To avoid wireless interference, keep the distance 

between the RF dongle for the Magic Motion remote 

control and the Wi-Fi dongle at 20 cm.

1

  Locate the designated Velcro attachment 

location on the TV. Then tear off the protection 

paper and attach the Velcro. (The attachment 

location is different depending on the TV model 

you own)

or

 

y

Separate purchase : 32/37/42/47/55LV37**, 

32/37/42/47/55LV55**, 32/42/47/55LW57** 

(This feature is not available for all country.)

* Attach the RF dongle aligning with the upper left 

corner bracket.

2

  Connect the RF Dongle Cable plug on the RF 

Dongle to a USB jack on the TV.

HDD IN USB IN 

1

USB Apps USB IN 

2

RF Dongle

Velcro

20 cm