LG 47LW5700 Benutzeranleitung

y

y

Use the remote control within the maximum 
communication distance (10 m). Using the 
remote control beyond this distance, or with 
an object obstructing it, may cause a com-
munication failure.

y

y

A communication failure may occur due to 
nearby devices. Electrical devices such as 
a microwave oven or wireless LAN product 
may cause interference, as this will use the 
same bandwidth (2.4 GHz) as the Magic Mo-
tion Remote Control.

y

y

The Magic Motion Remote Control may be 
damaged or may malfunction if it is dropped 
or receives a heavy impact.

y

y

When playing a game using the Magic 
Motion Remote Control, hold it securely by 
wrapping its strap around your wrist and 
adjusting the length with the adjustable ring.

y

y

Take care not to bump into nearby furniture 
or other people when using the Magic Motion 
Remote Control.

y

y

Manufacturer and installer cannot provide 
service related to human safety as the ap-
plicable wireless device has possibility of 
electric wave interference.

y

y

It is recommended that an Access Point 

(AP) be located more than 1 m away from 

the TV. If the AP is installed closer than 1 

m, the magic motion remote control may 

not perform as expected due to frequency 

interference.

The Magic Motion Remote Control operates by 
pairing with your TV.
Register the Magic Motion Remote Control to use.

To register the remote control, press the 

OK button 

on the remote control while aiming it at your TV.

Reset the remote control by pressing and holding 
both the 

OK and MUTE buttons for 5 seconds. 

(Once the reset is complete, the light on the 
Pointer blinks.) Then repeat the above procedure 
to register the remote control.

1

  Press 

OK button if there is no pointer on your 

TV screen. The pointer will then appear on the 
screen.
If the pointer has not been used for a certain 

period of time, it will disappear.

2

  You can move the pointer by aiming the Pointer 

Receiver of the remote control at your TV then 
move it left, right, up or down.
If the pointer does not work properly after click-
ing the 

OK button, leave the remote control for 

10 seconds then use it again.