Sony dvp-ns999es Handbuch

• DTS (DVD VIDEO only)
Selects the type of DTS signal.

• 48kHz/96kHz PCM (DVD VIDEO only)
Selects the sampling frequency of the audio 
signal.

• Even if you set “48kHz/96kHz PCM” to “96kHz/

24bit,” the sampling frequency is converted to 
48kHz/16bit when a “SURROUND” mode (page 
59) is selected.

• The analog audio signals from the AUDIO OUT 

L/R jacks and 5.1CH OUTPUT jacks are not 
affected by this setting and keep their original 
sampling frequency level.

To obtain the best possible surround sound, 
set the size of the speakers you have 
connected and their distance from your 
listening position. Then use the test tone to 
adjust the volume of the speakers to the same 
level.
This setting is effective when connecting the 
speaker with 5.1 CH OUTPUT jacks (page 
29).

You can create two different Speaker Setup 
settings, one for Super Audio CDs and one for 
all other types of discs.
When nothing is set in “SUPER AUDIO 
CD,” the “DVD” setting you have set 
becomes effective when you play Super 
Audio CDs.

the setup display” (page 75) to 

CD” using X/x, then press ENTER.

Example: when “DVD” is selected.

D-PCM

Select this when the player is 
connected to an audio 
component without a built-in 
DTS decoder.

DTS

Select this when the player is 
connected to an audio 
component with a built-in DTS 
decoder.

48kHz/16bit

The audio signals of DVD 
VIDEOs are always converted 
to 48kHz/16bit.

96kHz/24bit

All types of signals including 
96kHz/24bit are output in their 
original format. However, if the 
signal is encrypted for 
copyright protection purposes, 
the signal is only output as 
48kHz/16bit.

SPEAKER SETUP

SUPER AUDIO CD:

DVD:

SPEAKER SETUP (DVD)

DISTANCE:
LEVEL(FRONT)

:

LEVEL(REAR)

: 

OFF

TEST TONE:

FRONT:
CENTER:

YES

LARGE

LARGE

LARGE

REAR:
SUBWOOFER:

SIZE: