Sony SPOM1 Handbuch
Installation Instructions
SPOM1
3
INTRODUCTION
TOOLS REQUIRED FOR INSTALLATION
•
Phillips screwdriver
•
Drill and bit set
INSPECT MOUNT BEFORE ASSEMBLY
Carefully inspect mount assembly for shipping damage
(see Figure 1). If damage is apparent, call your carrier
claims agent and do not continue with installation until
the carrier has reviewed the damage.
(see Figure 1). If damage is apparent, call your carrier
claims agent and do not continue with installation until
the carrier has reviewed the damage.
NOTE: Thouroughly read and understand all assembly
instructions before starting installation.
Abbreviations used throughout this manual are identified
in the table below.
in the table below.
abbr.
Description
PFMS
Phillips Flat Head Machine Screw
PPMS
Phillips Pan Head Machine Screw
FW
Flat Washer
PPSM
Phillips Pan Head Sheet Metal Screw
Table 1: PARTS
ITEM
DESCRIPTION
QTY.
10
SCREW, Wood, Phillips, 1/4" x 2"
4
20
WASHER, Flat, 1/4"
4
30
WRENCH, Security, 5/32"
1
40
WRENCH, Hex, 3/16"
1
50
PAD, Felt, 1"
2
60
CLIP, Cable Management
2
70
PIN, Locking
1
80
SCREW, Button Head Security, #8-32 x 3/8"
1
90
NUY, Nylock, #8-32
1
WARNING: USING IMPROPER HARDWARE CAN
LEAD TO MOUNT AND/OR DISPLAY FALLING. Use
only hardware provided with mount. DO NOT
substitute!
LEAD TO MOUNT AND/OR DISPLAY FALLING. Use
only hardware provided with mount. DO NOT
substitute!
Figure 1: Parts
40
10
50
30
20
60
80
90
70