Sony BM-575A Handbuch

BM-575/577.E.3-800-079-2X.U/CA

z

Choose one of the following power sources

Make sure that nothing is connected to the DC IN 3V jack.

Open the battery compartment lid.

Insert two size AAA (R03) batteries.

When to replace the batteries
For BM-575:
Replace the batteries with new
ones when the DICT/BATT lamp
dims.

For BM-577:
Replace the batteries with new ones
when the DICT/BATT lamp of
the BATT lamps dims.

When batteries
are new

When batteries
have been used
for a while

When batteries
become weak

• BM-577 only: In some cases when the unit is used with rechargeable

batteries, only the DICT/BATT ( 

 ) and BATT ( 

 ) lamps will light

even though the batteries have been fully charged.

• After the batteries have been used for a while, the DICT/BATT lamp may

flicker with the playback sound when you turn up the volume; however,
this does not mean that you need to change the batteries.

• The unit will play back normally for a while even after the DICT/BATT

lamp dims. However, replace the batteries as soon as you can. If you do
not, subsequent recording will not be done correctly.

• Do not charge a dry battery.
• Do not use a new battery with an old one.
• Do not use different types of batteries.
• When you do not use the unit for a long time, remove the batteries to

avoid any damage caused by battery leakage and subsequent corrosion.

• Dry batteries will not be expended when another power source is

connected.

Insert the BP-43 rechargeable battery (not supplied) into the
battery compartment with the nameplate side down.

Set the unit to stop mode, and connect the AC-E30HG AC
power adaptor (not supplied) to the DC IN 3V jack and to the
wall outlet.

Unplug the AC power adaptor from the unit and the wall outlet
after about five hours.

Battery life
You can operate the unit for approx. 1.5 hours with a fully charged
battery.

Use the AC-E30HG AC power adaptor (not supplied). Connect the
adaptor to the DC IN 3V jack and to a wall outlet. Do not use any
other AC power adaptor.

Before inserting the cassette, take up any slack in the tape with a
thick pencil.

Use only standard Microcassettes with this unit.
Non-standard microcassettes cannot be used because their "L"
dimension (see illustration) is different.

1  

2