Sony BDPS3200 Handbuch

Seite von 16
2
BDP-S1200/BDP-BX120/BDP-S3200/BDP-BX320/BDP-S5200/BDP-BX520
4-476-195-11(1)
master page=left
C:\Users\fle1\Desktop\SD130006\4476195111_US\02
0WAR.fm
WARNING
To reduce the risk of fire or electric shock, do not expose 
this apparatus to rain or moisture.
To avoid electrical shock, do not open the cabinet. Refer 
servicing to qualified personnel only.
Do not expose batteries or appliances with battery-installed 
to excessive heat, such as sunshine and fire.
CAUTION
The use of optical instruments with this product will 
increase eye hazard. As the laser beam used in this Blu-ray 
Disc/DVD player is harmful to eyes, do not attempt to 
disassemble the cabinet.
Refer servicing to qualified personnel only.
This label is located on the laser protective housing inside 
the enclosure.
This symbol is intended to alert the user to the 
presence of uninsulated “dangerous voltage” 
within the product’s enclosure that may be of 
sufficient magnitude to constitute a risk of 
electric shock to persons.
This symbol is intended to alert the user to the 
presence of important operating and 
maintenance (servicing) instructions in the 
literature accompanying the appliance.
Precautions
• To prevent fire or shock hazard, do not place objects filled 
with liquids, such as vases, on the apparatus.
• Install this unit so that the AC adaptor can be unplugged 
from the wall socket immediately in the event of trouble.
• This equipment has been tested and found to comply 
with the limits set out in the EMC Directive using a 
connection cable shorter than 3 metres.
• The player is not disconnected from the AC power 
source as long as it is connected to the wall outlet, 
even if the player itself has been turned off.
• To reduce the risk of fire, do not cover the ventilation 
opening of the appliance with newspapers, 
tablecloths, curtains, etc.
• Do not expose the appliance to naked flame sources 
(for example, lighted candles).
• Do not install this player in a confined space, such as 
a bookshelf or similar unit.
• If the player is brought directly from a cold to a warm 
location, or is placed in a very damp room, moisture 
may condense on the lenses inside the player. Should 
this occur, the player may not operate properly. In this 
case, remove the disc and leave the player turned on 
for about half an hour until the moisture evaporates.
On AC adaptor
• Use the supplied AC adaptor for this player, as other 
adaptors may cause a malfunction.
• Do not disassemble or reverse-engineer.
• Do not confine the AC adaptor in a closed place such 
as a bookshelf or an AV cabinet.
• Do not connect the AC adaptor to a traveler’s electric 
transformer, which may generate heat and cause a 
malfunction.
• Do not drop or apply shock.
For United States customers. Not applicable 
in Canada, including in the province Of 
Quebec.
Pour les consommateurs Aux États-Unis. Non 
applicable au Canada, y compris la province 
de Québec.
FCC WARNING
You are cautioned that any changes or modifications not 
expressly approved in this manual could void your 
authority to operate this equipment.
This transmitter must not be co-located or operating in 
conjunction with any other antenna or transmitter.
The shielded Interface cable (LAN cable) must be used 
with the equipment in order to comply with the limits 
for a digital device pursuant to Subpart B of Part 15 of 
FCC Rules.
b
This equipment has been tested and found to comply 
with the limits for a Class B digital device, pursuant to 
Part 15 of the FCC Rules. These limits are designed to 
provide reasonable protection against harmful 
interference in a residential installation. This equipment 
generates, uses, and can radiate radio frequency energy 
and, if not installed and used in accordance with the 
instructions, may cause harmful interference to radio 
This device complies with Industry Canada licence-exempt 
RSS standard(s).
Operation is subject to the following two conditions;
(1) this device may not cause interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation 
of the device.