Sony dsc-h5 Handbuch

Seite von 123
86
Printing images directly using a PictBridge 
compliant printer
Even if you do not have a computer, you 
can print images shot using your camera by 
connecting the camera directly to a 
PictBridge compliant printer.
• “PictBridge” is based on the CIPA standard. 
(CIPA: Camera & Imaging Products 
Association)
In single-image mode
You can print a single image on a printing 
sheet.
In index mode
You can print several images at a reduced 
size on a printing sheet. You can print a set 
of either the same images (1) or different 
images (2).
1
2
• An index print function may not be provided 
depending on the printer.
• The quantity of images that can be printed as an 
index image differ depending on the printer.
• You cannot print movies.
• If the 
 indicator flashes on the screen of the 
camera for about five seconds (error 
notification), check the connected printer.
Prepare the camera to connect it to the 
printer via a USB connection. When 
connecting the camera to a printer that is 
recognized when [USB Connect] is set to 
[Auto], Stage 1 is unnecessary.
• It is recommended to use fully charged Nickel-
Metal Hydride batteries or an AC Adaptor (not 
supplied) to prevent the power from turning off 
partway through printing.
1
Press MENU to display the menu.
2
Press B on the control button to 
select  
(Setup).
3
Select [
] (Setup2) with V, then 
select [USB Connect] with v/V/B.
4
Select [PictBridge] with B/v, then 
press 
z.
The USB mode is set.
Stage 1: Preparing the camera
Index button
Control Button
MENU button
2