Sony PCV-J150 Handbuch

16

You must access the BIOS Setup Utility to make changes to the BIOS 
settings (see 

settings). 

1

Reboot the system.

2

When the Sony logo appears, press F3. The following message 
appears at the bottom of the screen.

Press <F2> for setup.

3

Press F2.

Each menu presents options for modifying the system configuration. 
Use the left and right arrow keys to select a menu from the menu bar. 
Use the up and down arrow keys to select items within a menu. Once 
an item is highlighted, use the plus/minus (+/-) keys to modify a 
setting. 

If an item has a triangle ( ) to its left, this indicates that a sub-menu of 
options is available. Press ENTER to access a sub-menu. If a sub-
menu contains items with a triangle, there is another layer of options 
from which to select.

4

Once you select an option, press ESC to back out of each menu until 
you reach the top level, where the menu bar appears.

5

To exit the BIOS setup utility, press ESC from any top-level screen and 
follow the prompts.

!