Sony CSS-PC1 Handbuch
-GB
Notes on using the Cyber-shot Station
Refer to the operating instructions for your camera as well as this manual.
The Cyber-shot Station is not a dust-proofed, moist-proofed, or water proofed product.
About the MODEL SELECT switch
The Cyber-shot Station allows you to attach your camera by setting the
MODEL SELECT switch ( , ).
See page 11 for further details.
The MODEL SELECT switch is set to when purchased.
Be sure to set the MODEL SELECT switch to the designated position
before use, or it may cause a malfunction of your camera or the Cyber-
shot Station.
MODEL SELECT
switch ( ,
)
Do not use or keep the Cyber-shot Station in locations subject to the following conditions:
Locations with extremes of temperature
The temperature in closed automobiles during summer may be extremely hot, causing deformation or
malfunction of the Cyber-shot Station.
Locations under direct sunlight or near heaters
This may cause deformation or a malfunction of the Cyber-shot Station.
Locations subject to vibration
Locations subject to strong magnetism
Precautions:
Even if the CHARGE lamp is not lit, the unit is not disconnected from the AC power source (mains) as long
as it is connected to the wall outlet (wall socket). If some trouble occurs while using the unit, immediately
shut off the power by disconnecting the plug from the wall outlet (wall socket).
Use the nearest wall outlet to get the AC Adaptor plugged in. If any malfunctions occur using the product,
unplug the AC Adaptor to cut off the power source.
The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet,
even if the set itself has been turned off.
Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.
Do not use the Cyber-shot Station in locations that are subject to strong radio waves or radiation. Images
may not be played back properly.
Avoid other metallic objects to contact with the connecting parts of the Cyber-shot Station and the power
cord. It may cause a short circuit.
Recording contents cannot be compensated for if playback is not possible due to damaged “Memory Stick
Duo”, a malfunction of your camera or the Cyber-shot Station, etc.
Do not attempt to connect the supplied USB cable to the multi connector on the bottom of the camera. It
may cause a malfunction due to the damage of the multi connector.