Sony PCWA-A100 Handbuch

Register the Access Point to use for communication on the Wireless Palette. When you have two or more Access Points, you can 

 you want to use by registering every Access Point. You may register up to four Access Points.

1.

The Wireless Palette appears.

2.

The Tool Box dialog box appears.

3.

The Add New Access Point dialog box appears.

4.

Enter the nickname for the Access Point. You may enter up to eight alphanumeric characters.

Enter the ID for the Access Point that you want to register. The Access Point ID is printed on the ID label on the bottom

surface of the Access Point.

If you have checked Peer to Peer, enter a string of up to 32 alphanumeric characters.

Enter the Encryption Key specified for the Access Point you are registering with Access Point Setup Utilities, if you want

encrypted wireless communication.

If the Encryption Key is not specified for the Access Point, no wireless communications are encrypted. If so, leave this field

blank.

o

Enter the Encryption Key that you specified using one of the Access Point Setup Utilities for Encryption Key on the Wireless

Palette. 

o

Ask your Access Point manager for the Encryption Key. 

Change the Encryption Key as follows:

o

Change the Encryption Key using one of the Access Point Setup Utilities. 

o

When you have changed the Encryption Key, register the Access Point as a new entry using the Wireless Palette.

(1)If only one Access Point is registered on the Wireless Palette,