Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
100
|
Chapter 7. OSPF
ProSafe Managed Switch
a. Select Routing > OSPF > Advanced > Stub Area Configuration. A screen similar
to the following displays.
b. Enter the following information:
•
In the Area ID field, enter 0.0.0.1.
•
In the Import Summary LSAs field, select Disable.
c. Click Add to save the settings.
CLI: Configure Area 1 as a Stub Area on A2
1.
Enable routing on the switch.
2.
Set the router ID to 2.2.2.2.
3.
Configure area 0.0.0.1 as a stub area.
(Netgear Switch) #config
(Netgear Switch) (Config)#ip routing
(Netgear Switch) (Config)#router ospf
(Netgear Switch) (Config-router)#router-id 2.2.2.2
(Netgear Switch) (Config-router)#area 0.0.0.1 stub