Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
240
|
Chapter 13. IGMP Snooping and Querier
ProSafe Managed Switch
CLI: Configure the Switch with an External Multicast Router
This example configures the interface as the one the multicast router is attached to. All IGMP
packets snooped by the switch is forwarded to the multicast router reachable from this
interface.
packets snooped by the switch is forwarded to the multicast router reachable from this
interface.
Web Interface: Configure the Switch with an External Multicast
Router
Router
1.
Select Switching > Multicast > Multicast Router Configuration. A screen similar to
the following displays.
the following displays.
2.
Under Multicast Router Configuration, scroll down and select the Interface 1/0/3 check box.
Now 1/0/3 appears in the Interface field at the top.
Now 1/0/3 appears in the Interface field at the top.
3.
In the Admin Mode field, select Enable.
4.
Click Apply.
Multicast Router Using VLAN
The example is shown as CLI commands and as a Web interface procedure.
CLI: Configure the Switch with a Multicast Router Using VLAN
This example configures the interface to forward only the snooped IGMP packets that come
from VLAN ID (<VLAN Id>) to the multicast router attached to this interface.
from VLAN ID (<VLAN Id>) to the multicast router attached to this interface.
(Netgear Switch)(Interface 1/0/3)# set igmp mrouter interface
(Netgear Switch)(Interface 1/0/3)# set igmp mrouter 2