Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

Show IGMP Querier Status

The example is shown as CLI commands and as a Web interface procedure.

CLI: Show IGMP Querier Status

To see the IGMP querier status, use the following command.

The command shows that the IGMP admin mode is Active. The mode is controlled by the set 
igmp command. If the mode is inactive, no query packet is sent.

Web Interface: Show IGMP Querier Status

Select Switching > Multicast > IGMP Snooping Configuration. A screen similar to 
the following displays.

Click Refresh.

(Netgear Switch) #show igmpsnooping querier vlan 1

VLAN 1 : IGMP Snooping querier status

----------------------------------------------

IGMP Snooping Querier VLAN Mode................ Enable

Querier Election Participate Mode.............. Disable

Querier VLAN Address........................... 0.0.0.0

Operational State.............................. Disabled

Operational version............................ 2