Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

Create a Static Address

The example is shown as CLI commands and as a Web interface procedure.

CLI: Create a Static Address

Web Interface: Create a Static Address

Select Security > Traffic Control > Port Security > Static MAC address. A screen 
similar to the following displays.

Under Port List, in the Interface list, select 1/0/1.

In the Static MAC Address section of the screen, enter the following information:

In the Static MAC Address field, enter 00:13:00:01:02:03.

In the Vlan ID list, select 3. 

Click Add.

Protected Ports

This section describes how to set up protected ports on the switch. Some situations might 
require that traffic is prevented from being forwarded between any ports at Layer 2 so that 
one user cannot see the traffic of another user on the same switch. Protected ports can:

Prevent traffic from being forwarded between protected ports.

Allow traffic to be forwarded between a protected port and a non-protected port.

(Netgear Switch) (Interface 1/0/1)#port-security mac-address 00:13:00:01:02:03