Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
Chapter 15. Security Management
|
267
ProSafe Managed Switch
Web Interface: Configure a Protected Port to Isolate Ports on
the Switch
the Switch
1.
Create a DHCP pool:
Note:
This example assumes that the DHCP service is enabled. For
information about how to enable the DHCP service, see the Web
interface procedure in
interface procedure in
373.
a. Select System > Services > DHCP Server > DHCP Server Configuration. A screen
similar to the following displays.
b. Under DHCP Pool Configuration, enter the following information:
•
In the Pool Name field, select Create.
•
In the Pool Name field, enter pool-a.
•
In the Type of Binding field, select Dynamic.