Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
Chapter 2. VLANs
|
29
ProSafe Managed Switch
5.
Enable protocol VLAN group 1 and 2 on the interface.
Web Interface: Create a Protocol-Based VLAN
1.
Create the protocol-based VLAN group vlan_ipx.
a. Select Switching > VLAN > Advanced > Protocol Based VLAN Group
Configuration. A screen similar to the following displays.
Enter the following information:
•
In the Group Name field, enter vlan_ipx.
•
In the Protocol list, select IPX.
•
In the VLAN ID field, enter 4.
b. Click Add.
2.
Create the protocol-based VLAN group vlan_ip.
a. Select Switching > VLAN >Advanced > Protocol Based VLAN Group
Configuration. A screen similar to the following displays.
b. Enter the following information:
•
In the Group Name field, enter vlan_ip.
•
In the Protocol list, select IP and ARP while holding down the Ctrl key.
(Netgear Switch)(Vlan)#exit
(Netgear Switch)#config
(Netgear Switch)(Config)#interface 1/0/11
(Netgear Switch)(Interface 1/0/11)#protocol vlan group 1
(Netgear Switch)(Interface 1/0/11)#protocol vlan group 2
(Netgear Switch)(Interface 1/0/11)#exit