Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
360
|
Chapter 19. Switch Stacks
ProSafe Managed Switch
Change the SDM template back to the default
CLI: Change the SDM template back to the default
Note:
After this command is issued, the switch will remove the
startup-config and reboot. Upload your start-config before issuing
this command, and confirm you really want to issue the command.
this command, and confirm you really want to issue the command.
Web Interface: Change the SDM template back to the default
1.
Select System > Management > SDM Template Preference
2.
Select Default from the drop-down menu for SDM Next Template ID.
3.
Click Apply.
(M5300) (Config)#no sdm prefer
Startup-config will be deleted on the affected units and the
units will be force rebooted.
Are you sure you want to change the SDM Template ID? (y/n)y