Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

Seite von 542
374
   
|    
Chapter 22.  DHCP Server 
 
ProSafe Managed Switch 
Note:  
If there is no DHCP L3 relay between client PC and DHCP server, 
there must be an active route whose subnet is the same as the 
DHCP dynamic pool’s subnet.
Web Interface: Configure a DHCP Server in Dynamic Mode
1. 
Create VLAN 200.
a. Select Switching > VLAN > Basic > VLAN Configuration. A screen similar to the 
following displays.
b.  Under VLAN Configuration, in the VLAN ID field, enter 200.
c.  Click Add.
2. 
Add port 1/0/1 to VLAN 200.
a. Select Switching > VLAN >Advanced > VLAN Membership. A screen similar to the 
following displays.
b.  In the VLAN ID field, select 200.
c.  Click Unit 1. The ports display.