Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
402
|
Chapter 25. Spanning Tree Protocol
ProSafe Managed Switch
Configure Rapid STP (802.1w)
The example is shown as CLI commands and as a Web interface procedure.
CLI: Configure Rapid STP (802.1w)
Web Interface: Configure Rapid STP (802.1w)
1.
Enable 802.1w on the switch:
a. Select Switching > STP > STP Configuration. A screen similar to the following
displays.
b. Enter the following information:
•
For Spanning Tree Admin Mode, select the Enable radio button.
•
For Force Protocol Version, select the IEEE 802.1w radio button.
c. Click Apply.
2.
Configure the CST port.
(Netgear switch) (Config)# spanning-tree
(Netgear switch) (Config)# spanning-tree forceversion 802.1w
(Netgear switch) (Interface 1/0/3)# spanning-tree port mode