Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

Configure ports 1/0/2-1/0/5 to host port mode.

a. Select Security > Traffic Control > Private VLAN > Private VLAN Port Mode 

Configuration. A screen similar to the following displays.

b.  Under Private VLAN Port Mode Configuration, select the 1/0/2 to 1/0/5 interface 

check box. 

c.  In the Port VLAN Mode field, select Host from the pull-down menu.

d.  Click Apply to save the settings.

Configure Private-VLAN Host Ports

The example is shown as CLI commands and as a Web interface procedure.

CLI: Configure Private-VLAN Host Ports 

Use the following commands to associate isolated ports 1/0/2-1/0/3 to a private-VLAN 
(primary=100, secondary=101). Community ports 1/0/4-1/0/5 to a private-VLAN (primary=
100, secondary=102).

Web Interface: Assign Private-VLAN Port Host Ports 

Associate isolated ports 1/0/2-1/0/3 to a private-VLAN (primary=100, secondary=101).

(Netgear Switch)  #config 

(Netgear Switch)  (Config)#interface 1/0/2-1/0/3

(Netgear Switch)  (Interface 1/0/2-1/0/3)#switchport private-vlan host-association 100 101

(Netgear Switch)  (Interface 1/0/2-1/0/3)#exit

(Netgear Switch)  (Config)#interface 1/0/4-1/0/5

(Netgear Switch)  (Interface 1/0/4-1/0/5)#switchport private-vlan host-association 100 102

(Netgear Switch)  (Interface 1/0/4-1/0/5)#end