Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

a. Select Routing > IPv6 Multicast > MLD > Global Configuration. A screen similar to 

the following displays.

b.  For Admin Mode, select the Enable radio button.

c.  Click Apply.

Enable MLD on interface 1/0/24.

a. Select Routing > IPv6 Multicast > MLD > Routing Interface Configuration. A 

screen similar to the following displays.

b.  Under MLD Routing Interface Configuration, scroll down and select the 1/0/24 check 

box. Now 1/0/24 appears in the Interface field at the top.

c.  In the Admin Mode field, select Enable.

d.  Click Apply. 

MLD Snooping

In IPv4, Layer 2 switches can use IGMP snooping to limit the flooding of multicast traffic by 
dynamically configuring Layer 2 interfaces so that multicast traffic is forwarded to only those 
interfaces associated with IP multicast address. In IPv6, MLD snooping performs a similar 
function. With MLD snooping, IPv6 multicast data is selectively forwarded to a list of ports 
that want to receive the data, instead of being flooded to all ports in a VLAN. This list is 
constructed by snooping IPv6 multicast control packets.