Manualsbrain.com
  1. Handbücher
  2. Marken
  3. Netgear
  4. M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch
  5. Ratgeber Für Administratoren

Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

Download
Seite von 542
538
   
|    
Chapter 32.  Captive Portal 
 
ProSafe Managed Switch 
are used to configure captive portal. VSAs are denoted in the ID column and are comma 
delimited (vendor ID, attribute ID).
CLI: Configure RADIUS as the Verification Mode
Table 4.  RADIUS Attributes for Configuring Captive Portal Users 
 
RADIUS Attribute No.
Description
Range
Usage
Default
User-Name
1
User name to be authorized.
1–32 characters Required
None
User-Password
2
User password.
8–64 characters Required
None
Session-Timeout
27
Logout once session timeout is 
reached (seconds). If the attribute is 
0 or not present then use the value 
configured for the captive portal.
Integer 
(seconds)
Optional
0
Idle-Timeout
28
Log out once idle timeout is reached 
(seconds). If the attribute is 0 or not 
present, then use the value 
configured for the captive portal.
Integer 
(seconds)
Optional
0
WISPr-Max-Band
width-Up
14122, 7
Maximum client transmit rate (b/s). 
Limits the bandwidth at which the 
client can send data into the network. 
If the attribute is 0 or not present, 
then use the value configured for the 
captive portal.
Integer
Optional
0
WISPr-Max-Band
width-Down
14122, 8
Maximum client receive rate (b/s). 
Limits the bandwidth at which the 
client can receive data from the 
network. If the attribute is 0 or not 
present, then use the value 
configured for the captive portal.
Integer
Optional
0
(Netgear Switch) (Config-CP 1)#radius-auth-server Default-RADIUS-Server
(Netgear Switch) (Config-CP 1)#verification radius