Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren

In the Routing Mode field, select Enable.

d.  Click Apply to save the settings.

Add a Default Route

When IP routing takes place on a switch, a routing table is needed for the switch to forward 
the packet based on the destination IP address. The route entry in the routing table can either 
be created dynamically through routing protocols like RIP and OSPF, or be manually created 
by the network administrator. The route created manually is called the static or default route.

A default route is used for forwarding the packet when the switch can not find a match in the 

routing table for an IP packet. The following example shows how to create a default route.

CLI: Add a Default Route 

72).

Web Interface: Add a Default Route

Select Routing > Routing Table > Basic > Route Configuration. The Route 
Configuration screen displays.

In the Route Type list, select DefaultRoute.

In the Next Hop IP Address field, enter one of the routing interface’s IP addresses. 

The Network Address and Subnet Mask fields will not accept input as they are not 

needed. 

(FSM7338S) (Config) #ip route default?

<nexthopip> Enter the IP Address of the next router.

(FSM7328S) (Config)#ip route default 10.10.10.2