Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Ratgeber Für Administratoren
Chapter 7. OSPF
|
95
ProSafe Managed Switch
•
In the Priority field, enter 255.
•
In the Metric Cost field, enter 64.
c. Click Apply to save the settings.
8.
Enable OSPF on port 1/0/4.
a. Select Routing > OSPF > Advanced > Interface Configuration. A screen similar to
the following displays.
b. Under Interface Configuration, scroll down and select the interface 1/0/4 check box.
Now 1/0/4 appears in the Interface field at the top.
•
In the OSPF Area ID field, enter 0.0.0.2.
•
In the OSPF Admin Mode field, select the Enable.
•
In the Priority field, enter 255.
•
In the Metric Cost field, enter 64.
c. Click Apply to save the settings.
Stub Areas
The example is shown as CLI commands and as a Web interface procedure.
Figure 12. Area 1 is a stub area
Port 2/0/11
Port 2/0/191
Port 1/0/151
Layer 3
switch
switch
Area 0
Area 1
Layer 3
switch
switch