Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
23
Managed Switches
The following table displays the determining factors for issuing unicast TFTP requests.
Monitor and Complete the Auto Install Process
Upon boot-up in the absence of a saved config file, a message displays on the console
stating that the Auto Install procedure is beginning. A message displays when Auto Install is
complete. The message also indicates that configuration must be saved to avoid performing
Auto Install on the next reboot.
stating that the Auto Install procedure is beginning. A message displays when Auto Install is
complete. The message also indicates that configuration must be saved to avoid performing
Auto Install on the next reboot.
When Auto Install has been successfully completed, the messages are in buffered log, not on
the console. You can execute a show running-config command to validate the contents of
configuration. You must be logged in as administrator.
the console. You can execute a show running-config command to validate the contents of
configuration. You must be logged in as administrator.
Save the Configuration
An administrator must explicitly save the downloaded configuration in nonvolatile memory so
that the configuration is available on the next reboot. If you are using the CLI, first make sure
that the configuration is correct, then issue a copy running-config startup-config
that the configuration is available on the next reboot. If you are using the CLI, first make sure
that the configuration is correct, then issue a copy running-config startup-config
command.
Host-Specific Config File Not Found
If the Auto Install process fails to download any configuration file, a message is logged. If a
“final” configuration file is not downloaded, the entire process repeats every 10 minutes.
“final” configuration file is not downloaded, the entire process repeats every 10 minutes.
Terminate the Auto Install Process
You can terminate the Auto Install process at any time before downloading the config file.
Terminate the install when the switch is disconnected from the network, or if the configuration
Terminate the install when the switch is disconnected from the network, or if the configuration
3
<hostname>.cfg
Host-specific config file, associated with
host name
host name
Yes
4
host.cfg
Default config file
Yes
TFTP Server
Address
Available
Address
Available
Host-Specific Router
Config File Name
Available
Config File Name
Available
TFTP Request Method
Yes
Yes
Issue a unicast request for the host-specific router config
file to the TFTP server.
file to the TFTP server.
Yes
No
Issue a unicast request for a default network or router
config file to the TFTP server.
config file to the TFTP server.
Order
Sought
Sought
File Name
Description
Final File
Sought
Sought