Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
26
Managed Switches
DHCP Server Configuration
The following information is configured on the DHCP or BOOTP server:
•
The IP address (yiaddr) and subnet mask (option1)
•
The name of the configuration file (bootfile or option 67)
•
The IP address of the TFTP server (option 150)
TFTP Server Configuration
The configuration file is on the TFTP server (for example, switch.cfg).
CLI: Switch Configuration
1.
Have the configuration file saved after download from the TFTP server.
(Netgear Switch) #boot autoinstall auto-save
(Netgear Switch) #boot autoinstall start
Autoinstall starts and waits for the boot options from the DHCP server.
(Netgear Switch) #network protocol dhcp
Changing protocol mode will reset ip configuration.
Are you sure you want to continue? (y/n)y
2.
Request an IP address, configuration file name, and TFTP IP address from the DHCP
server.
(Netgear Switch) #
Config file 'startup-config' created successfully.
AutoInstalled configuration is saved.
(Netgear Switch) #show autoinstall
AutoInstall Mode.............................. Stopped
AutoInstall Persistent Mode................... Enabled
AutoSave Mode................................. Disabled
AutoInstall Retry Count....................... 3
AutoInstall State............................. AutoInstall is
completed.
completed.
Autoinstall is now completed.