Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

(NETGEAR Routing) #show ipv6 access-lists ip61

ACL Name: ip61

Outbound Interface(s): control-plane

Rule Number: 1

Action......................................... permit

Match Every.................................... FALSE

Protocol....................................... 17(udp)

Committed Rate................................. 32

Committed Burst Size........................... 16

Time-based ACLs allow one or more rules within an ACL to be based on time. Each ACL rule 
within an ACL except for the implicit deny all rule can be configured to be active and 
operational only during a specific time period. The time range commands allow you to define 
specific times of the day and week in order to implement time-based ACLs. The time range is 
identified by a name and can then be referenced by an ACL rule defined with in an ACL.

Use this command to create a time range identified by name, consisting of one absolute time 
entry and/or one or more periodic time entries. The name parameter is a case-sensitive, 
alphanumeric string from 1 to 31 characters that uniquely identifies the time range. An 
alpha-numeric string is defined as consisting of only alphabetic, numeric, dash, underscore, 
or space characters.

Destination L4 Port 
Keyword

The destination port for this rule.

IP DSCP

The value specified for IP DSCP.

Flow Label

The value specified for IPv6 Flow Label.

Log

Displays when you enable logging for the rule.

Assign Queue

The queue identifier to which packets matching this rule are assigned.

Mirror Interface

The unit/slot/port to which packets matching this rule are copied.

Redirect Interface

The unit/slot/port to which packets matching this rule are forwarded.

Time Range Name

Displays the name of the time-range if the IPv6 ACL rule has referenced a time range.

Rule Status

Status (Active/Inactive) of the IPv6 ACL rule.