Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

(NETGEAR Switch)# show auto-voip oui-table

OUI          Status          Description

---------    ----------     

 ---------

00:01:E3     Default         SIEMENS

00:03:6B     Default       

  

CISCO1

00:01:01     Configured   

 

  VoIP phone

This section describes commands you use to monitor iSCSI sessions and prioritize iSCSI 
packets. iSCSI Optimization provides a means of giving traffic between iSCSI initiator and 
target systems special Quality of Service (QoS) treatment. This is accomplished by 
monitoring traffic to detect packets used by iSCSI stations to establish iSCSI sessions and 
connections. Data from these exchanges is used to create classification rules that assign the 
traffic between the stations to a configured traffic class. Packets in the flow are queued and 
scheduled for egress on the destination port based on these rules.

This command sets the aging time for iSCSI sessions. Behavior when changing aging time:

When aging time is increased, current sessions will be timed out according to the new 
value.

When aging time is decreased, any sessions that have been dormant for a time 
exceeding the new setting will be immediately deleted from the table. All other sessions 
will continue to be monitored against the new time out value.

OUI

OUI of the source MAC address.

Status

Default or configured entry.

OUI Description

Description of the OUI.

Default

10 minutes

Format

iscsi aging time time

Mode

Global Config

time

The number of minutes a session must be inactive prior to its removal. Range: 1-43,200.