Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

This command displays the IGMP statistical information for the interface. The statistics are 
only displayed when the interface is enabled for IGMP. 

The argument unit/slot/port corresponds to a physical routing interface or VLAN 
routing interface. The vlan keyword and vland-id parameter are used to specify the VLAN 
ID of the routing VLAN directly instead of in the unit/slot/port format. The vlan-id parameter 
is a number in the range of 1–4093. 

The IGMP Proxy is used by IGMP Router (IPv4 system) to enable the system to issue IGMP 
host messages on behalf of hosts that the system discovered through standard IGMP router 
interfaces. With IGMP Proxy enabled, the system acts as proxy to all the hosts residing on its 
router interfaces.

This command enables the IGMP Proxy on the an interface or range of interfaces. To enable 
the IGMP Proxy on an interface, you must enable multicast forwarding. Also, make sure that 
there are no multicast routing protocols enabled on the router.

Format

show ip igmp interface stats [unit/slot/port | vlan vland-id]

Modes

Privileged EXEC

User EXEC

Querier Status

The status of the IGMP router, whether it is running in Querier mode or Non-Querier mode.

Querier IP Address The IP address of the IGMP Querier on the IP subnet to which this interface is attached.

Querier Up Time

The time since the interface Querier was last changed.

Querier Expiry 
Time

The amount of time remaining before the Other Querier Present Timer expires. If the local system is 
the querier, the value of this object is zero.

Wrong Version 
Queries

The number of queries received whose IGMP version does not match the IGMP version of the 
interface.

Number of Joins

The number of times a group membership has been added on this interface.

Number of Groups

The current number of membership entries for this interface.

Format

ip igmp-proxy

Mode

Interface Config