Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

DHCP relay

REQUEST hops field more than config value

The DHCP relay agent has processed a DHCP 
request whose HOPS field is larger than the 
maximum value allowed. The relay agent will not 
forward a message with a hop count greater than 
4. 

DHCP relay

Request's seconds field less than the config 
value

The DHCP relay agent has processed a DHCP 
request whose SECS field is larger than the 
configured minimum wait time allowed.

DHCP relay

processDhcpPacket: invalid DHCP packet type: 
%u\n

The DHCP relay agent has processed an invalid 
DHCP packet. Such packets are discarded by 
the relay agent.

OSPFv2

Best route client deregistration failed for OSPF 
Redist

OSPFv2 registers with the IPv4 routing table 
manager (“RTO”) to be notified of best route 
changes. There are cases where OSPFv2 
deregisters more than once, causing the second 
deregistration to fail. The failure is harmless.

OSPFv2

XX_Call() failure in _checkTimers for thread 
0x869bcc0

An OSPFv2 timer has fired but the message 

queue that holds the event has filled up. This is 
normally a fatal error.

OSPFv2

Warning: OSPF LSDB is 90% full (22648 LSAs).

OSPFv2 limits the number of Link State 

Advertisements (LSAs) that can be stored in the 

link state database (LSDB). When the database 
becomes 90 or 95 percent full, OSPFv2 logs this 
warning. The warning includes the current size of 
the database.

OSPFv2

The number of LSAs, 25165, in the OSPF LSDB 
has exceeded the LSDB memory allocation.

When the OSPFv2 LSDB becomes full, OSPFv2 
logs this message. OSPFv2 reoriginates its 
router LSAs with the metric of all non-stub links 
set to the maximum value to encourage other 
routers to not compute routes through the 
overloaded router.