Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch
Management Commands
133
M5300, M6100, and M7100 Series ProSAFE Managed Switches
Commands dfltCmdsList stop-only TACACS
Commands UserCmdAudit
start-stop
TACACS
DOT1X
dfltDot1xList
start-stop radius
Line EXEC Method List Command Method List
------- ---------------------------------------
Console dfltExecList dfltCmdsList
Telnet dfltExecList dfltCmdsList
SSH dfltExecList UserCmdAudit
clear accounting statistics
This command clears the accounting statistics.
show domain-name
This command displays the configured domain-name.
Command example:
(NETGEAR Switch) #
(NETGEAR Switch) #show domain-name
Domain : Enable
Domain-name :abc
SNMP Commands
This section describes the commands that you can use to configure Simple Network
Management Protocol (SNMP) on the switch. You can configure the switch to act as an
SNMP agent so that it can communicate with SNMP managers on your network.
Management Protocol (SNMP) on the switch. You can configure the switch to act as an
SNMP agent so that it can communicate with SNMP managers on your network.
Format
clear accounting statistics
Mode
Privileged Exec
Format
show domain-name
Mode
Privileged Exec