Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Softwarehandbuch

system, displays the switch activation status. For a standalone system, the unit parameter is 
not valid.

This command associates a given text description with an image. Any existing description will 
be replaced. The command is executed on all blades in a chassis.

This command updates the bootcode (boot loader) on the switch. The bootcode is read from 
the active-image for subsequent reboots. The unit parameter identifies the blade on which 
this command must be executed. When this parameter is not supplied, the command is 
executed on all blades in a chassis. 

This section describes the commands you use to view information about system features, 
components, and configurations. 

This command displays the contents of the Address Resolution Protocol (ARP) table that is 
associated with the IP address of the chassis. This IP address learns only ARP entries that 
are associated with the management interfaces (network or service ports). ARP entries that 
are associated with routing interfaces are not listed.

Format

show bootvar [unit]

Mode

Privileged EXEC

Format

filedescr {image1 | image2} text-description

Mode

Privileged EXEC

Format

update bootcode [unit]

Mode

Privileged EXEC

Format

show arp switch

Mode

Privileged EXEC 

IP Address

IP address of the management interface or another device on the management network.